Web Power Switch

This service controls a power switch that is controllable over the internet.

So far catkit2 has been tested on the following web power switches:

LPC7-PRO from TeleDynamics (for more information, see the Spec Sheet and User Manual. Note: no software driver installation required)

Configuration

web_power_switch1:
    service_type: web_power_switch
    simulated_service_type: web_power_switch_sim
    interface: web_power_switch
    requires_safety: false

    user: username
    password: password
    ip_address: 000.000.000.00
    dns: domain_name_system

    # Plugged-in devices with their outlet number:
    outlets:
        npoint_tiptilt_lc_400: 1
        iris_usb_hub: 2
        newport_xps_q8: 3
        iris_dm: 4
        quad_cell: 5
        air_valve: 6
        pupil_led: 7
        fpm_led: 8

Properties

None.

Commands

None.

Datastreams

{outlet_name}: The name of an outlet. These are defined by the config file (see the sample Configuration section above where the names of eight example outlets are given).